Home » Services

Services

When laying parquet of any

When laying parquet of any kind it is necessary to remember that parquet is just the upper layer in floor construction, which is a rather difficult engineering construction.  In particular, the quality of parquet primarily depends on the durability of parquet flooring.  Naturally, with certain skills, you can lay the parquet yourself but to create real lasting and attractive parquet flooring can only be done by professionals.

Parquet assembling always begins with the base preparation.  This phase of assembly is very important, because aesthetics and operation reliability primarily depends on the quality of base preparation.

The base has to be even, solid, waterproof, durable, and able to withstand  applicable workload.

The first phase of construction assembly is filling of cement screed.  Concrete screed can serve as the base of parquet flooring.  But, because the screed is practically never even, the device of parquet floors based on screed is not the best option.  If also needs to be considered that humidity of screed should not exceed 3%.  At present time, there are all kinds of leveling blends.  Flatness of finished screed is checked with the help 2-meter rod, which is applied to the screed in optional direction.  For this purpose, the gap should not be more 2 mm by 2 meter of length between the rod and the surface of the screed.

The best base for parquet is waterproof plywood.  This base is more expensive but has an advantage, which is a 100% compatibility of material base and parquet, unlike the option of parquet laying on the concrete screed.  Plywood is laid by fragments-squares, between which expansion seam is left.  Waterproofing is performed before the plywood is being laid.  Attachment of plywood to the screed is done with the aid of treenail and glue.  Plywood is humidity sensitive, therefore, when plywood is laid it is very important to follow temperature-humidity regime.  When laying plywood on rails, it is necessary, for the seams to be on rails.  Parquet laying with plywood materially increases the floor tension.  Walking on this kind of parquet is more convenient than on parquet laid directly on screed.

With the purpose to make the base of parquet less expensive, flake board can be use instead of plywood, however, you need to keep in mind that flake wood is more humidity sensitive.  The surface of the base is no different from the one made of plywood.

When the base surface of parquet is ready, you can start laying the parquet.  However, the level of humidity on premises, and humidity of the base and humidity of parquet needs to be measured previously.

For block parquet, art parquet, and palace parquet, solid wood block flooring:

Surface alignment of levelling mix;

Technological interval for drying of the aligned base. Up to 1.8%  cm humidity;

Saturation and application of glue coating to the base;

Application of glue coating to  the base;

Placing of waterproof and humid proof plywood on glue; with additional attachments of the screed to               treenails and screws and special nails for concrete;

Technological interval for complete glue polymerization;

Sanding of plywood and leveling of joints;

Applying glue to the parquet, with additional attachment of special nails;

technological interval for complete polymerization of parquet glue;

Gradual polishing up of parquet in order to use linen of different granularity;

Varnish intermediate coating;

Hydro lock around the floor perimeter;

Base assembling;

For three-layer parquet solid wood block:

Leveling of bases by leveling mixtures;

Technological interval for drying out of the leveled out base up to 1.8% (cm) of humidity;

Laying of mount with joint binding;

Laying of parquet  blocks  and laminated parquet;

Base assembling

NEWS

Company “InexUkrParket” - at Domotex Middle East Fair 2006 in Dubai represented new brand of highly artistic parquet - Tavolini

FOLDERS